Z33 350z Power steering hard line replacements (pair) Type:RHD - HR Specific NOTE 2: Stacking 2 sets

NOTE 2: Stacking 2 sets of shims can be used to space the subframe down 12mm (Close to OEM height)

the 28mm I

Wider track for FR cars gives more grip and less body roll and by adjusting the rear LCA's you can alter a vehicles understeer/oversteer properties

The GKTECH high misalignment tie rods have 64 degrees of misalignment and also up to 25mm of bump steer correction built-in

swappable front / rear master cylinders allow it to suit any brake setup and bias can be adjusted on the fly (using wilwoods balance bar adjuster cable)

Z33 350z Power steering hard line replacements (pair) Type:RHD - HR Specific NOTE 2: Stacking 2 setsThe GKTECH Z33 350z power steering hard line replacements are a braided stainless steel pair of lines that replace the 2 factory hard lines on the steering rack itself. The OEM hard lines are prone to damage with the removal of engine gearboxes and the way that the fittings seal on the rack is irregular, off the shelf fittings from your local hose shop will not suffice. Nevermind, we have machined some custom SS316 internal flare sealed adapters to