Hamilton Cams Bolt on Cam Retainer - 07-c-002 1998 8 Super Gauge

8 Super Gauge

Banks 4 inch heavy-duty stainless Monster exhaust system cuts backpressure up to 98 percent and flows up to 176 percent better than stock

0-1575 deg F temperature range

Does not sacrifice any ground clearance

Ford Power stroke

Hamilton Cams Bolt on Cam Retainer - 07-c-002 1998 8 Super GaugeFor use with mechanically injected engines with helical cut cam gears. The bolt on retainer will ensure that the cam gear is not pushed off of the cam in high rpm, high fuel delivery situations. Use red loc tite and torque bolt to 44 ft lbs Common rail engines or engines that use straight cut or spur gears do not need this bolt on retainer. If you use silicon instead of a gasket on the front cover, be sure to check clearance between the bolt on