Altex 2K Additive Water Toys • 135º turning arc lock-to-

• 135º  turning arc lock-to- lock

(12917D) Chrome Covered Nylon - suits 25mm/28mm hose (cut end off tail to achieve 25mm) 36mm cut out 52mm Dia

In the event you are separated from the dive boat you can be seen and identified in the water

Stands 17mm high overall but flushes into woodwork by 14mm

Minimum 4ft or maximum 8ft of chimney is required

Altex 2K Additive Water Toys • 135º turning arc lock-to-Designed to be used in Altex Yacht & Boat Regatta Gloss Enamel to convert the film into a cross linked (2K) acrylic Accelerates the cure of Regatta Gloss Enamel top coat Depending on addition rate, will reduce dust free dry times by up to 50% Increased hardness of the cured film Increases flow and ultimate gloss level Reduces time to be able to mask out areas Can also be used in AY &B Timbercote Varnish where multiple coats are required to reduce time