Takaab MIX-X-1U - Two Channel Expander for Takaab MIX v2, 2MIX & 2MIX-1U Low-pass Gate reliable analogue VCO with a

reliable analogue VCO with a rich warm sound

For this you need the Takaab 4VIV

Analog matrix sequencer based on Serge's Programmer from the 70s

A simple 2HP clock divider with odd and less common divisions

Adds two extra attenuated channels to the Takaab MIX

Takaab MIX-X-1U - Two Channel Expander for Takaab MIX v2, 2MIX & 2MIX-1U Low-pass Gate reliable analogue VCO with a* This is a not a standalone module. For use only with Takaab MIX v2, Takaab 2MIX or 2MIX 1U * Adds two extra attenuated channels to the Takaab MIX. or Takaab 2MIX. Connections Use a 2. 54mm 2 pin jumper cable to connect to one of the three pin pairs on the MIX, 2MIX or 2MIX 1U. Make sure to connect GND to GND (top row of pins) and SIG to SIG (bottom row); the cable should not twist. You can connect up to three MIX Xs to one MIX this way. Package