QTY 1 - 11 Tooth HTD Falcon Motor Output Pulley Bearing These hex hubs have been

These hex hubs have been updated for number 10 bolts and come in both thin and thick sizes

this cable is an optional upgrade to power co-processors with the MitoCANdria

ELEV-SPRING-003

Note: This is only compatible with the Thrifty Nova motor controller and does not work with other motor controllers on the market

- QTY 2 Aluminum Thrifty Metahubs - 24 Tooth HTD pulley that support the following configurations -

QTY 1 - 11 Tooth HTD Falcon Motor Output Pulley Bearing These hex hubs have beenThese aluminum 5M HTD Pulleys work great for creating belt reductions directly off the motor. Use a 15mm wide belt or two 9mm wide belts as the inside pulley teeth are 18. 5mm wide. Choose either 8mm keyed bore or spline bore depending on the motor type you're using. STEP CAD Files Available