Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi Ideal for roughing out spindle

Ideal for roughing out spindle blanks but they can also be useful for some finer work

Ideal for Collecting dust and chips from small lathes

Made from high carbon steel Robert Sorby slicks offer a perfect combination of hardness and toughness together with a razor sharp cutting edge

It is also suitable for holding natural-edged bowls between centres

This design gives an extremely strong grip

Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi Ideal for roughing out spindleHeadstock thread adaptor. To fit onto a lathe with M33 x 3. 5mm headstock thread. Suitable to mount a Scroll Chuck or Faceplate with a 1" x 8tpi thread. The thread adaptor has spanner flats to aid tightening or removal. This thread adapter has 2 locking screws for securing the adaptor onto the lathe. Centre located 7mm from the end. Includes 10mm diameter blind hole for tightening or removing using a suitable knock out bar. Specification Adaptor Type