Raymarine 20M Backbone Cable f/SeaTalkng [A06037] Lighting | Interior / Courtesy Light Impedance: 8 Ohms

Impedance: 8 Ohms

Label backlighting pre-installed

8 MHz Impedance: (Ohms): 50 Gain: 6 dB Max Input (Watts): 50 DC Ground: NO - the antenna will read "open circuit" when checked with an ohm meter or continuity tester

SO-239 connector

UPC: 632085082628

Raymarine 20M Backbone Cable f/SeaTalkng [A06037] Lighting | Interior / Courtesy Light Impedance: 8 OhmsBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone