A4000 4-Device IDE Interface adapter some third-party budget boards cut

some third-party budget boards cut costs and do not feature the resistor arrays which can lead to memory reliability issues

A500 is a registered trademark of AmigaKit Ltd in Spain

Features: 0

■ Raspberry Pi 3 A■ Micro SD card (we recommend a 32GB capacity) configured with PiStorm files Please note that the PiStorm is a community project and the downloadable software/firmware files used with this adapter maybe experimental

Features: 1MB RAM to boost total system memory to 2MB Memory auto configures with no drivers required Two-page colour manual included   Important note about inferior third-party expansions: our official A500™ Memory Expansion features resistor arrays on board to limit the rising/falling edge of some high speed signals

A4000 4-Device IDE Interface adapter some third-party budget boards cutA4000 4 Device IDE interface Compatible with the Commodore Amiga 4000 Desktop or A4000T. The Commodore Amiga 4000 is supplied with a single IDE connector as standard allowing only 2x IDE devices. This interface gives two IDE connectors allowing up to 4x IDE devices. Features 2x 40 pin IDE connectors (primary secondary) and 1x 40 pin IDE connector to link to original Amiga motherboard IDE interface. The 40 way (3. 5") IDE cable to connect this adapter