CANverter M12 adaptor cable motor and reinforcing rods HS822 MT75

and reinforcing rods HS822 MT75

HTP pumps were produced from 2005 and do not have a mounting flange around the circumference of the pump body: they are attached by studs that are mounted into the rear plate of the pump

The strainer has a transparent cover

Recommended cylinder: MTC52 (3

In order to prevent the pump cycling on and off unnecessarily

CANverter M12 adaptor cable motor and reinforcing rods HS822 MT75The Vetus CANverter M12 adapter cable will interface NMEA2000 or J1939 networks to a V CAN network. CANVM12A is used where an M12 cable requires adaption to V CAN network, for example between a hub and a Yamaha or Honda system where a CANverter is not required.