Insta-Cure+ Medium 2oz. servo join it to an aluminum

join it to an aluminum alloy and copper gear set supported by an MR74 bearing and control it with accurate digital circuitry

The MH32mod airfoil allows the Prelude to float around in a thermal

See pics above for dimensions

1V 25C Lipo Battery with Deans Plug

05 mm long

Insta-Cure+ Medium 2oz. servo join it to an aluminumInsta Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1"