Poly 74/75 Additives dunau100 Skin Tite® requires no release

Skin Tite® requires no release agent

3 Straight Gouges

326 & 327 ColorMatch™ Series plastics are urethane resins that were developed specifically for adding color pigments and fillers to achieve true color representation or filler effect

welded aluminum or welded steel crucibles

the cure time may be longer and there could be some loss of strength in the cured rubber as well as an increased tendency to shrink after repeated casting

Poly 74/75 Additives dunau100 Skin Tite® requires no releaseAdd Poly 74 75 Part C Softener to Poly 74 Series, Poly 75 Series, Poly 77 Series & PT Flex Series polyurethane rubbers for a lower viscosity mix and softer cured rubber. The amount of Part C needed varies from product to product and should be determined through experimentation. Example: To soften Poly 74 30 Liquid Rubber (Shore A30) to a Shore A15, mix 1A: 1B: 1C by weight. NOTES: When Part C is used, the cure time may be longer and there could be