Battery Dongles - XT60 to Other Type:XT60F to GX16-2F Plug and Play: No complicated

Plug and Play: No complicated setup required

NOTE: The Panasonic J2 pack is not compatible with a OEM controller unless you can accept higher capacity packs (rf mod

These are replacements for our swing arm brake adapter plates in case you break one or get too creative experimenting

This is the proper 15mm drilled front axle with 20mm end to fit our double adjustable shocks

you absolutely should test polarity with a meter before connecting

Battery Dongles - XT60 to Other Type:XT60F to GX16-2F Plug and Play: No complicatedThese battery dongles will take our common XT60F charger end and give you another option like XLR or GX16. Please check our wiring and polarity, we will not be responsible if your board is not wired this way. If in doubt, you absolutely should test polarity with a meter before connecting. Dongle Wiring XT60 F to XLR F: Pin 1 Negative; Pins 2 and 3 Positive XT60 F to GX16 2 F: Pin 1 Positive; Pin 2 Negative XT60 F to GX16 3 F: Pin 1 Positive; Pin 3